Donl1150 Posted October 3, 2020 Share Posted October 3, 2020 Does anyone have a viz file for the Singing Mrs Santa Claus Face from Holiday Coro that you would be willing to share? Link to comment Share on other sites More sharing options...
dibblejr Posted October 15, 2020 Share Posted October 15, 2020 You can create that in the vis using that picture for the background. It is super easy. If you cant get it and still want me to show you how to convert and sequence this 3 channel face I can help you with that after HAlloween I have the Santam he may look dif that Mrs Santa but on the prop there is no dif in sequencing JR Link to comment Share on other sites More sharing options...
Donl1150 Posted October 15, 2020 Author Share Posted October 15, 2020 Thanks JR. I did create the viz file for Mrs. Claus using that pic. My drawing isn't the greatest but it serves the purpose. As for sequencing, I am doing fine with that on this prop since there are only 3 channels for her Open or Closed mouth. Not too difficult. Same is true for Mr. Claus singing.....only a couple of channels for Open or Closed mouth. Now the Coro singing tree is different. Lots of channel possibilities for Open / Closed. It's here that Papagayo is useful. I am currently working on a song with the tree in Papagayo (after finally figuring it out) but once done there, I still don't know how to use the Translator to get it from PPGO into the proper channels of the SE. I could use help with that if you have time after Halloween. Much appreciated if you could! Thanks Don Link to comment Share on other sites More sharing options...
dibblejr Posted October 15, 2020 Share Posted October 15, 2020 10 hours ago, Donl1150 said: Thanks JR. I did create the viz file for Mrs. Claus using that pic. My drawing isn't the greatest but it serves the purpose. As for sequencing, I am doing fine with that on this prop since there are only 3 channels for her Open or Closed mouth. Not too difficult. Same is true for Mr. Claus singing.....only a couple of channels for Open or Closed mouth. Now the Coro singing tree is different. Lots of channel possibilities for Open / Closed. It's here that Papagayo is useful. I am currently working on a song with the tree in Papagayo (after finally figuring it out) but once done there, I still don't know how to use the Translator to get it from PPGO into the proper channels of the SE. I could use help with that if you have time after Halloween. Much appreciated if you could! Thanks Don Bob will be your best bet there. I wiped my brain of the pgo logic and only recall what it took to just get ready to sequence in papagayo. You have to select the clip board from what I recall and it will put your sequence how you configured it in the transfer tool that Bob created. JR 1 Link to comment Share on other sites More sharing options...
ItsMeBobO Posted October 15, 2020 Share Posted October 15, 2020 (edited) Download teamviewer and invite me (ItsMeBobO on teamviewer) to control your PC and we can go over anything you want. Edited October 15, 2020 by ItsMeBobO Link to comment Share on other sites More sharing options...
dibblejr Posted October 15, 2020 Share Posted October 15, 2020 (edited) 6 minutes ago, ItsMeBobO said: Download teamviewer and invite me (ItsMeBobO on teamviewer) to control your PC and we can go over anything you want. Even MIIP? LOL JK for now. Ah- you were referring to the OP. I haven't advanced that far yet. Just pushed 1000 nodes today in my last 2 pumpkin faces. That's all 4 took a week. Gonna put them out today and perhaps tomorrow start placing the controllers. Then on to adding MIIP to my ready to go 3 sequences. LOL JR Edited October 15, 2020 by dibblejr Link to comment Share on other sites More sharing options...
Donl1150 Posted October 16, 2020 Author Share Posted October 16, 2020 22 hours ago, ItsMeBobO said: Download teamviewer and invite me (ItsMeBobO on teamviewer) to control your PC and we can go over anything you want. Thanks for the offer but I'm not going to pay $49/mo for teamviewer. I'll continue to try to figure out the translator. Link to comment Share on other sites More sharing options...
PhilMassey Posted October 16, 2020 Share Posted October 16, 2020 Last time I looked, Teamviewer had a free tier for non commercial use. Link to comment Share on other sites More sharing options...
Donl1150 Posted October 16, 2020 Author Share Posted October 16, 2020 I see that now. I will sign up and see if I can figure out how to remote with someone. Thx Phil Link to comment Share on other sites More sharing options...
Donl1150 Posted October 16, 2020 Author Share Posted October 16, 2020 On 10/15/2020 at 5:07 PM, ItsMeBobO said: Download teamviewer and invite me (ItsMeBobO on teamviewer) to control your PC and we can go over anything you want. It was just pointed out to me that there is a free version for personal use. I have now installed it and will try to figure out how to use it. If you're available next week, I would have time either Wednesday or Thursday if that works for you Bob. Let me know. Thx! Link to comment Share on other sites More sharing options...
Recommended Posts