JSelph Posted August 26, 2020 Share Posted August 26, 2020 Hey everyone I have some 1st generation CCB's and CCP's that I have used on my roofline and windows for a few years. Now that I have upgraded to S5, I want to take advantage of the newer Motion Effects such as Bars, Butterfly, Spiral, etc. It is my understanding my older CCB's and CCP's will not work on an Enhanced Network. But if I run them through a regular network, will I be able to use those newer Motion Effects with these older lights/controllers? Or do I need to buy new 2nd Generation lights and controllers? Link to comment Share on other sites More sharing options...
Mr. P Posted August 26, 2020 Share Posted August 26, 2020 (edited) I believe the older CCBs and CCPs work as long as they have the latest firmware installed. Check out the speed page: http://www1.lightorama.com/network-speeds/ Edited August 26, 2020 by Mr. P Link to comment Share on other sites More sharing options...
k6ccc Posted August 26, 2020 Share Posted August 26, 2020 I have been running my day one that the CCP went on sale over enhanced networking every since that came into existence. I did have to update the firmware however. Link to comment Share on other sites More sharing options...
JSelph Posted August 30, 2020 Author Share Posted August 30, 2020 Thanks Mr. P & Jim! I will be updating the firmware and testing the older units on the enhanced network this weekend. Link to comment Share on other sites More sharing options...
Recommended Posts