Jump to content
Light-O-Rama Forums

Power Adapter for uMP3g4 Gen4 Mini Director?


SimplyCosmic

Recommended Posts

I was gifted a Gen4 Mini Director with MP3 Player (uMP3g4) but it doesn't appear to have a power adapter. 

Is there a replacement that I can purchase? 

I appreciate all your help.

Edited by SimplyCosmic
Link to comment
Share on other sites

The director doesn't come with a power adapter, it is powered by the nearest controller through the cat5 cable.

Edited by Mr. P
Link to comment
Share on other sites

What Mr P said. NORMALLY

If you have really long cables between the director and the controller, you can use a commonly found,  12VDC  wall wort CENTER + (most of the LOR boards with barrel cons, use this same.)

💡 Many Security Cameras use this. As I said COMMON as dirt 😀

 

Link to comment
Share on other sites

37 minutes ago, TheDucks said:

What Mr P said. NORMALLY

If you have really long cables between the director and the controller, you can use a commonly found,  12VDC  wall wort CENTER + (most of the LOR boards with barrel cons, use this same.)

💡 Many Security Cameras use this. As I said COMMON as dirt 😀

 

Or if the first thing in your network is an ELL and not a controller then you will have to power the director so it can power the ELL.

Link to comment
Share on other sites

  • 1 month later...

Thanks. For some reason it refused to power on with just an ethernet cable connected to the 16 channel controller, so I ended up with a 12-volt adapter that works fine with it. 

Edited by SimplyCosmic
Link to comment
Share on other sites

  • The topic was locked
Guest
This topic is now closed to further replies.
×
×
  • Create New...