kevinito Posted August 15, 2020 Share Posted August 15, 2020 Hello, I just purchased the CTB16PC starter kit and had a few questions before I begin the dive: 1. Are these mini lights capable of dimming with this controller? 2. How about this LED strip for dimming and other non-RGB effects (flashing, dimming, etc.)? 3. If these are not fully compatible, does anyone have suggestions? Thanks! Link to comment Share on other sites More sharing options...
dibblejr Posted August 15, 2020 Share Posted August 15, 2020 (edited) 6 minutes ago, kevinito said: Hello, I just purchased the CTB16PC starter kit and had a few questions before I begin the dive: 1. Are these mini lights capable of dimming with this controller? 2. How about this LED strip for dimming and other non-RGB effects (flashing, dimming, etc.)? 3. If these are not fully compatible, does anyone have suggestions? Thanks! Your CTB16 uses your standard light. Traditional Incandescent or LED not RGB lights. The first link- they will work The second link. Will not The lights linked will not work with your CTB16 Purchase your mini LED's from any of the big box stores or any other vendors who sell them. RGB lights are an entire different ball game and use different controlllers. JR Edited August 15, 2020 by dibblejr 1 Link to comment Share on other sites More sharing options...
TheDucks Posted August 15, 2020 Share Posted August 15, 2020 What JR said. ALSO, if the plug is a Module and not a simple plain or stacking found on most simple strings. Beware. If there are no other controls, thos may be usable BUT only ON/OFF (and that mode is only on Gen 3 and not the Kit) dimming curve. You will fry most cheap electronic ballasts if you try fancy stuff. 1 Link to comment Share on other sites More sharing options...
Recommended Posts