Sequence Editor stops playing before end of track.

[FireBug]

Went to try and put the final touches on a sequence today, and sequence editor stops playing with 8 seconds left in the track.  If a try and play from a point past that 8 second mark Sequence Editor hangs, and I have to close it and reopen to be able to do anything again.

I have tried extending the total track time to see if the problem was the closeness to end of the file that may have been the problem, and even if I put a whole minute on, it always stops at the exact same place.

[PhilMassey]

Is the audio ending early. The sequence will stop when the media file ends.

 

[hooverrl@embarqmail.com]

Mine did this with the HU program when making SD cards. I switched to new Hb Hub program and it solved the short time cutoffs.

 

[Brian Mitchell]

Is the audio file corrupt?  Will it play completely through in windows media player?

[Mr. P]

I have to ask only because I have done this in the past. Are you using the exact same music you sequenced with? My sequencing computer has so many files on it including 3-4 files of the same music but may be a different length. I once sequenced a song which was 3 minutes long and when I moved the files around I had to sync the music again. However I accidentally used a song, same name but it was only 2:50 long so my sequence stopped short. Once I figured out what I did I synced the correct version that I sequenced with and it played fine.

[FireBug]

11 hours ago, PhilMassey said:

Is the audio ending early. The sequence will stop when the media file ends.

 

Yes this turned out to be the problem.  I wanted some silence at the end of the song before the next one started up. I tried to simply extend the track in sequencer, but it turns out I need to also have a music track for at least that long.  So I edited the song, and put 15 seconds of silence on the end of it, and then swapped it into my sequence and now it plays right to the end.

 

Thanks