tjkamper Posted November 25, 2019 Share Posted November 25, 2019 Is it possible to splice a string of CCBs to separate them by a few feet using pigtails? Basically I would like to run the same string on a couple different areas with some gap and don't want to have bulbs that I don't light up between them. (Moving from one window to an adjacent window that is only 24" away). Link to comment Share on other sites More sharing options...
k6ccc Posted November 26, 2019 Share Posted November 26, 2019 Technically yes. It will void the warranty however. With the short distances between windows for you, it wont be a problem. Make sure you get the wires right or you will let the smoke out. Link to comment Share on other sites More sharing options...
tjkamper Posted November 26, 2019 Author Share Posted November 26, 2019 What if I wanted to do it at a greater distance? Say I wanted to do it at 15 feet? Link to comment Share on other sites More sharing options...
TheDucks Posted November 26, 2019 Share Posted November 26, 2019 50 minutes ago, tjkamper said: What if I wanted to do it at a greater distance? Say I wanted to do it at 15 feet? My experience is with other brands (12V). 15' is pushing it. The chip in the bulb was designed for a dozen or so inches, not for long runs. They are Not like controllers that expect cables. Some null pixels midway (between) may help Link to comment Share on other sites More sharing options...
Recommended Posts