Jump to content

Motion Effect Fade


DocBrown86
 Share

Recommended Posts

Having all kinds of fun here lately with motion effects... So Here I am using S5 and no longer using S4. I add my motion effect and it looks great. I realize it would look better if the last 2 seconds of the 10 second effect faded the effect out.

This is where I am struggling. I add a timing bar at the final 2 second mark. I surly cannot figure out how to fade that sucker out... I press 'D', it overrides the effect to solid white. If I switch Select mode from "Cell" to "Effect", it forces a selection of both cells and fades the entire thing. It isn't a consistent pattern, so if I add the effect separate to both cells, I'll get a jittery effect jump from the main effect to the fading part. I feel like I was able to easily accomplish this is Pixel Editor in S4.

How do I accomplish this??

Link to comment
Share on other sites

Figured it out. Maybe this will help someone in the future:

Went  to "Effect" tab and switched from "On" to "DMX". Set Intensity from 255 to 0. Switched from "Selection" to "Intensity" and there it was...

Perhaps there is a faster way? If not, at least this will do the trick!

Link to comment
Share on other sites

  • 2 months later...

This seems like a poor workaround for a feature used very often, but perhaps we're using it differently than it was designed. @MattBrown is there a better way to modify an existing motion effect with a fade, as shown below?  As @DocBrown86 mentioned, you can't apply a simple fade to an existing motion effect like you could in both S4 and in previous version of S5. It makes it a new effect.

  fade.thumb.png.d4a5accc6a34cb213aa657c7abd54bce.png

 

Edit: It appears that if you select "Motion" as the type above, you can work as normal.  The cursur will change to a pencil (as you're using motion effects) but that signifies you're making motion effects, not just "on" effects. 

Edited by lkcubsrule
Link to comment
Share on other sites

I"m pretty much a newbie, but I have been doing it 2 different ways - just depending on what feels convenient at the time.

1 - Select the area I want to face, right click and select Existing Effect (Foreground) - Fade Down across Selection

2 - As mentioned above, choose "Motion" under Type and then use Drag Fade.  When I finish dragging, the Motion Effects box pops us with my current effect and I just hit OK.

Link to comment
Share on other sites

See this picture.

https://www.dropbox.com/s/m98w0ndu146j339/nudge.jpg?dl=0

Toggle effect dragging.

It will put drag handles on your effects. There are two different handles, one is a straight drag, and the other which looks like an angle will do a fade.

Moving your cursor around the handle will cause the drag type icon  to change.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...