ChuckHutchings Posted September 27, 2008 Share Posted September 27, 2008 One of my DC boards (CMB-16 ver 1.02) has channels 1-8 inoperative. If I turn on "shimmer" I do get some dim action but that's about it.I checked the fuses and they are OK and I swapped the wall-warts that power each side. Channels 9-16 are fine with either one.A voltmeter shows I've got 12V+ on each channel. (These things switch the neg side, I believe.)Any thoughts? Link to comment Share on other sites More sharing options...
ChuckHutchings Posted September 27, 2008 Author Share Posted September 27, 2008 NM - I figured it out.One of the output leads was shorted. Works fine now. Link to comment Share on other sites More sharing options...
Ponddude Posted September 27, 2008 Share Posted September 27, 2008 I find that over time these things tend to work themselves out...(enter perfect example above):) Link to comment Share on other sites More sharing options...
Recommended Posts