a31ford Posted December 12, 2018 Share Posted December 12, 2018 (edited) Greetings all. Does anyone know how to change the power level on an EDM FM transmitter ?? I know the choice is 10 or 100 Mw but I cannot find my manual.... I'm on their site, but no option for downloading manual (or even reading online). I'm thinking it was a jumper block, but it's been to many years, and the transmitter is not accessible at the moment. Edited December 12, 2018 by a31ford Link to comment Share on other sites More sharing options...
PhilMassey Posted December 12, 2018 Share Posted December 12, 2018 If memory serves there is a slide switch inside on the circuit board. I can send you my manual when I get chance. 1 Link to comment Share on other sites More sharing options...
a31ford Posted December 12, 2018 Author Share Posted December 12, 2018 I'm looking at their picture on their website, and just to the left of the frequency down button... red box, black lever.... don't bother looking for the manual. Link to comment Share on other sites More sharing options...
a31ford Posted December 12, 2018 Author Share Posted December 12, 2018 WAY TO fast on that !! THANK YOU Phil !!!!!!!!!!! Link to comment Share on other sites More sharing options...
PhilMassey Posted December 12, 2018 Share Posted December 12, 2018 Quite welcome. Link to comment Share on other sites More sharing options...
k6ccc Posted December 12, 2018 Share Posted December 12, 2018 You can download the manual from the EDM site (did it not long ago). As I recall, had to poke around for it or do a Google search to find it. Try Googling it. Link to comment Share on other sites More sharing options...
a31ford Posted December 20, 2018 Author Share Posted December 20, 2018 Phil sent me his, AND ironically I had gotten a reply from EDM also, showing the link to get it from their website. FYI, for those that have to change channel (mine was bought by a station JUST out of receive area) their signal can "piggyback" on yours, so the lisener can hear both, at the same time. (that is why I had to move channels......) Link to comment Share on other sites More sharing options...
Recommended Posts