Jump to content

CB100D Seals leaking


jwblazek
 Share

Recommended Posts

Put up my Mega tree, the 8 CB100D controllers all talked and worked fine on the bench. Had our first LONG OVERDUE rain and guess what got affected? 4 of the 8 CB100D's had water inside. None of the cases are cracked, the grommets for the CAT5 cables are all intact and pliable.

Anyone else have this issue and what was there fix? I'm thinking of an easy way out, putting a couple of wraps of green electrical tape around the seam and cover the 8 screws

Link to comment
Share on other sites

WARNING !!!!! 

 

Just looked into this problem and using a dial caliper determined that  the o-ring seal is not making any contact with the lid, hence the issue ! Appears the recessed area of the lid is too deep. I am going to use tape and then a zip lock baggie and hang boxes vertically

 

Link to comment
Share on other sites

  • Don locked this topic
Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...