jfuller8400 Posted November 15, 2018 Share Posted November 15, 2018 to LOR for how they design their controllers. I was troubleshooting what looked like a bad channel on a CTB16 and finally ran it down to being a bad neutral on the output dongle. Of course this controller was already installed out in the light show and of course the bad dongle was at the bottom of the port (which would have made finding the bad neutral a real PITA). Lucky for me, LOR put an extra lug on the neutral bus which allowed me to quickly install a new temp dongle to get the channel working again. I'll do a more permanent repair after this year's show but having that extra lug saved me a huge amount of time this year. So I say a big Thank You to LOR for a most excellent design of their controllers! Link to comment Share on other sites More sharing options...
Recommended Posts