butric Posted October 16, 2018 Share Posted October 16, 2018 Hi all, Is it possible to limit the output of specific channels within the LOR software anywhere? I have some fixtures that I would like to add on to my CMD24D but it's a 12v system and the fixture accepts 7v max. I can just put a 5W resistor in series with it but I don't have those readily available. Just wanted to see if anyone has had success with a different method before I go buy some resistors. Thanks! Link to comment Share on other sites More sharing options...
TheDucks Posted October 16, 2018 Share Posted October 16, 2018 (edited) Use a bunch of silicon rectifiers in series. They won't be as current sensitive . IIRC about 0.5V per diode a common, cheap: 1n4001 if under an Amp Edited October 16, 2018 by TheDucks Link to comment Share on other sites More sharing options...
butric Posted October 16, 2018 Author Share Posted October 16, 2018 7 minutes ago, TheDucks said: Use a bunch of silicon rectifiers in series. They won't be as current sensitive . IIRC about 0.5V per diode a common, cheap: 1n4001 if under an Amp Oh I do have some of those laying around! I'll see if they will work, and if so, order more perhaps! Link to comment Share on other sites More sharing options...
Recommended Posts