lanopie Posted September 27, 2018 Share Posted September 27, 2018 I have built 2 spiral trees using CCPixel 100 and the prop are setup as a tree 360 wedges. One tree are old CCP and the other I bought the Original CCP back in the April sale. My old CCP I can do a spiral tree no problem, it's smooth and very nice. With the latest CCP's I can't get the spiral to move properly. It comes down in chunks of 4 lights and missing 4 and then 4 and missing 4. I tried to reverse the strings on the controller but that made it worse. I've checked all settings on the old CCP's and the new ones and everything is setup the same way, even the props are identical, the firmware are the same on all 8 controllers. The only way I can get the new one to work properly is to choose 2 identical color. If I choose 2 different colors, it will give me a combination of 4 red, 4 blue, 4 red and 4 blue... In my sequencer I would see 2 lines going when I have chosen 2 colors but only one line on the actual tree. Both of my props are setup with the shape of the Tree 360 wedges and has 8 Actual strings, 50 RGB Nodes per strings, 1 fold in each string and starting location is set to Bottom Left CCW. I'm at a lost, anyone have any ideas? Thanks! Link to comment Share on other sites More sharing options...
lanopie Posted September 28, 2018 Author Share Posted September 28, 2018 Sorry folks I found the problem, I had 2 controller opposite each other but on the wrong side. Switched them and everything is cool now. Link to comment Share on other sites More sharing options...
Recommended Posts