Jump to content

Tie two CTB-16D's


Papa-LF
 Share

Recommended Posts

I have a couple of LOR 16 channel CTB-16D boxes that I have loaded as stand alone boxes before. I need 19 channels for a quick sequence. Is there a way to tie two boxes together without adding a computer in the mix?

Link to comment
Share on other sites

Papa,

If you design your sequence with like controller 1 with channels 1-16 and controller 2 with channels 1-3. The you can take that sequence and load it into either one of the controllers. The controller with the sequence loaded will be the master. The you can cable the second controller to ther first controller and the first controller will control all the lights.

Hope I made sense.

Chuck

Link to comment
Share on other sites

Thanks Chuck, will give it a try.

Link to comment
Share on other sites

Papa,

I love the firework. Do you have any "How To" that you would share?

I would like to make some of those for myself.

Thank You

Chuck

Link to comment
Share on other sites

Which part Chuck - the top piece or the light arches. I have a complete how to on the light arches. The top piece you would need to check with Bill Foley - he gave me two of these - both broken - I made one out of the two.

Overview

http://video.google.com/videoplay?docid=-6327971773299776482&hl=en

Part 1 and part 2 how to.....

http://video.google.com/videoplay?docid=2300764787207066258&hl=en

http://video.google.com/videoplay?docid=-1540264324517375687&hl=en

Link to comment
Share on other sites

Here is the explosion - was built commercially. A good friend gave me this one. Was broken, I fixed the sequencing controler.

Attached files 154887=8931-fireworks3.jpg

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...