hoosierdoc Posted December 18, 2017 Share Posted December 18, 2017 Please confirm which wires I hook to what. I have 12v 3-wire nodes. i see the control of data wire goes to data. Then I have positive and negative on the connector. The pixel has 12V on one wire and +GND on the other. Does that mean GND is going to positive and 12V is going to negative terminal? simple question I know, just can't find simplistic wiring pics online and I like to triple check before frying my stuff or myself... Link to comment Share on other sites More sharing options...
hoosierdoc Posted December 18, 2017 Author Share Posted December 18, 2017 This is what I have except mine are black wire and 12v Link to comment Share on other sites More sharing options...
Wingrider Posted December 18, 2017 Share Posted December 18, 2017 (edited) GND = negative/ground connection -12v side . POS / + / 12v side Hope that helps and good luck! Edited December 18, 2017 by Wingrider Link to comment Share on other sites More sharing options...
TheDucks Posted December 18, 2017 Share Posted December 18, 2017 9 minutes ago, hoosierdoc said: This is what I have except mine are black wire and 12v That + seems to be associated with the square pad, not the gnd Link to comment Share on other sites More sharing options...
k6ccc Posted December 18, 2017 Share Posted December 18, 2017 Man, that is poorly labeled! As has been said, Ground is the negative. Also, the arrow is data flow, so in that photo, Data In is on the left and Data Out is on the right. 1 Link to comment Share on other sites More sharing options...
hoosierdoc Posted December 18, 2017 Author Share Posted December 18, 2017 thanks guys. The positive mark was confusing me. Link to comment Share on other sites More sharing options...
Recommended Posts