Wayne K Posted November 27, 2017 Share Posted November 27, 2017 Does anyone know where you can get extra 4 wire pigtails that come with the 10 watt rgb flood lights? I am wanting to put a backup controller together in an enclosure, but cant find any pig tails on the lor store site. Does anyone know if they are available from lor or if there is another vendor that you can get them from? Thanks Wayne Link to comment Share on other sites More sharing options...
TheDucks Posted November 27, 2017 Share Posted November 27, 2017 (edited) 1 hour ago, Wayne K said: Does anyone know where you can get extra 4 wire pigtails that come with the 10 watt rgb flood lights? I am wanting to put a backup controller together in an enclosure, but cant find any pig tails on the lor store site. Does anyone know if they are available from lor or if there is another vendor that you can get them from? Thanks Wayne You could buy the extension cord and cut it in 2 pieces. http://store.lightorama.com/10wafl10exco.html Use (the correct ) 1 for the pigtail and use the other for any project (I use the mating cord to feed 3 (white LED) strips in a candy cane propeller) Edited November 27, 2017 by TheDucks added link Link to comment Share on other sites More sharing options...
Wayne K Posted November 27, 2017 Author Share Posted November 27, 2017 Thanks for the info, but for me that would be a waste as I don't have a need for the other end. Does anyone know if this plug from holiday coro will fit the 10 watt rgb : http://www.holidaycoro.com/product-p/736-m.htm Thanks Wayne Link to comment Share on other sites More sharing options...
Bigfrog 59 Posted November 27, 2017 Share Posted November 27, 2017 I purchased these pigtails off of Amazon. Good quality pigtails with 18 gauge wire. Delivery was fast and all 25 sets worked. 25 of LEDJump Black 18AWG 4 Pin Waterproof Male Female Connector Cable RGB LED Strip with Rubber... Sold by: LEDJUMP® Link to comment Share on other sites More sharing options...
TheDucks Posted November 27, 2017 Share Posted November 27, 2017 3 hours ago, Wayne K said: Thanks for the info, but for me that would be a waste as I don't have a need for the other end. Does anyone know if this plug from holiday coro will fit the 10 watt rgb : http://www.holidaycoro.com/product-p/736-m.htm Thanks Wayne NO! They are way different. I know because they are what I use for all my OTHER RGB. (The plugs and caps, new at HC this year are great for protecting threads and contacts during handling leads or unused pigtails) Link to comment Share on other sites More sharing options...
Robsaus Posted November 29, 2017 Share Posted November 29, 2017 I have a bunch of 4 wire pigtails that I got from Ray Wu that I'm selling. I had them made to 18" long. https://www.aliexpress.com/store/product/10-pairs-4-Core-White-Waterproof-cable-45cm-long-each-male-and-female/701799_532156471.html?spm=2114.12010612.0.0.7c41914dd72sLI Rob Link to comment Share on other sites More sharing options...
TheDucks Posted November 29, 2017 Share Posted November 29, 2017 The OP asked for LOR 10W flood COMPATIBLE pigtails Link to comment Share on other sites More sharing options...
Wayne K Posted November 29, 2017 Author Share Posted November 29, 2017 (edited) 7 hours ago, Robsaus said: I have a bunch of 4 wire pigtails that I got from Ray Wu that I'm selling. I had them made to 18" long. https://www.aliexpress.com/store/product/10-pairs-4-Core-White-Waterproof-cable-45cm-long-each-male-and-female/701799_532156471.html?spm=2114.12010612.0.0.7c41914dd72sLI Rob As stated above. Are they compatible with the ones lor uses on the 10 rgb floods? Wayne Edited November 29, 2017 by Wayne K Link to comment Share on other sites More sharing options...
PhilMassey Posted November 29, 2017 Share Posted November 29, 2017 There are many pigtails out there that will physically fit. However the pin outs may differ even from batch to batch. It is a good idea to always check which color wire goes to which pin with a meter. Link to comment Share on other sites More sharing options...
Robsaus Posted November 29, 2017 Share Posted November 29, 2017 I don't have a LOR 10W flood to try it to. PM me and I can send u a text with Pics Rob Link to comment Share on other sites More sharing options...
smithzone Posted January 4, 2018 Share Posted January 4, 2018 Had the same issue and resorting to cutting LOR extensions in half I had some 4 pins from Ray that seemed to fit and still couldn't get a consistent connections (pin-outs were different, but I fixed that) Link to comment Share on other sites More sharing options...
Recommended Posts