AussieJoe Posted November 27, 2016 Share Posted November 27, 2016 It must be that time of year. I have cables running everywhere, my wife's eyebrows are permanently raised and I've renewed my friendship with my electrician. I have 12 CCRs. 11 are good, but one is driving me crazy. When you plug power in, the LEDs come on white, however the lights do not come on during a sequence or hardware utility test. So.. The LEDs work when you plug them into a different controller. I've tried swapping power supplies. I've upgraded firmware to 1.17 - which means that the controller is talking and firmware works and ID is correct. I've checked the config against a working controller - all good. Any ideas? Link to comment Share on other sites More sharing options...
Bird Posted November 27, 2016 Share Posted November 27, 2016 Does the CCR strip cycle RBG color in reset/test mode? IE hold reset button in and apply power to CCR controller. Link to comment Share on other sites More sharing options...
AussieJoe Posted November 27, 2016 Author Share Posted November 27, 2016 @Bird, Yes, cycles through Red, Blue Green, all pixels working! Link to comment Share on other sites More sharing options...
Recommended Posts