Peter B Posted January 15, 2008 Share Posted January 15, 2008 Hi, Don't know if this has been posted before. During the LOR sale I am going to order CTB-16KD kit boards, is their a fault finding chart available.So if channel 3 goes down or does something strange then look at R?? and if this is okay look at Q?? etc etc.Thanking you in advance.Pete Link to comment Share on other sites More sharing options...
Denny Posted January 15, 2008 Share Posted January 15, 2008 Peter, There is a pretty good troubleshooting guide on the LOR Support site. Fortunately, I have not had to use it yet, but it gives voltage readings and different points to help track down the problem. I am not an electronics type, but even I can understand it! Link to comment Share on other sites More sharing options...
Peter B Posted January 15, 2008 Author Share Posted January 15, 2008 Denny wrote: Peter, There is a pretty good troubleshooting guide on the LOR Support site. Fortunately, I have not had to use it yet, but it gives voltage readings and different points to help track down the problem. I am not an electronics type, but even I can understand it!Hi again Denny, Firstly thanks for your input. Please can you point me to the page you are describing.Cheers,Pete. Link to comment Share on other sites More sharing options...
Push Eject Posted January 15, 2008 Share Posted January 15, 2008 http://www.lightorama.com/support.htmlUnder "Kit Troubleshooting"Cheers,Charlie Link to comment Share on other sites More sharing options...
John Pidliskey Posted January 15, 2008 Share Posted January 15, 2008 I know your in the UK, but if there was a problem with the board, you could call LOR. I'm sure they would repair the board as well. Link to comment Share on other sites More sharing options...
LightORamaDan Posted January 15, 2008 Share Posted January 15, 2008 John Pidliskey wrote: I know your in the UK, but if there was a problem with the board, you could call LOR. I'm sure they would repair the board as well.We have fixed card for customers in the UK... The problem is the shipping charges. The customer has to ship it to use and it can be costly. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now