Frank Rossi Posted January 4, 2008 Share Posted January 4, 2008 I just completed CTB16PC Kit and want to test it. This is the first time I have used the softwware or hardware. When I try to install the USB485B drivers as discribed in step 3c I enter C:WinXP_2000 and when I press next I get lication does not exist. I installed the LOR hardward utility disk and also downloaded thethe utility from LOR support utility. I have windows XP? Any help would be great. Link to comment Share on other sites More sharing options...
Brad Bilger Posted January 4, 2008 Share Posted January 4, 2008 The drivers should be on the CD that came with the Adapter. In 3C, you should enter the drive designation for your CD drive, and not C: If your CD is Drive D:, then you would enter D:WinXP_2000. Remember, you are putting Drivers on your hard drive. Link to comment Share on other sites More sharing options...
Frank Rossi Posted January 4, 2008 Author Share Posted January 4, 2008 I'll try that now.Thanks Link to comment Share on other sites More sharing options...
Recommended Posts