debtoews Posted November 10, 2015 Share Posted November 10, 2015 I have 1 CCR that after playing them the other night- it appears that like 10 or so pixels are "stuck" on light blue..I tried re-booting my program..is it going bad or something else I need to do?? Your help is appreciated- thanks! Link to comment Share on other sites More sharing options...
steve synek Posted November 11, 2015 Share Posted November 11, 2015 It has a problem, I suggest opening a help ticket. Steve 1 Link to comment Share on other sites More sharing options...
debtoews Posted November 11, 2015 Author Share Posted November 11, 2015 I did Steve- thanks for responding! Link to comment Share on other sites More sharing options...
dgrant Posted November 11, 2015 Share Posted November 11, 2015 Also, look at the last sequence that ran that CCR. In the very last cell location for the whole CCR, make sure its all turned off....look at every channel in there, vertically down the cells. Anything that was still on, will remain on, till you command it again. Link to comment Share on other sites More sharing options...
debtoews Posted November 11, 2015 Author Share Posted November 11, 2015 ok I will- thanks Dgrant! Link to comment Share on other sites More sharing options...
debtoews Posted November 12, 2015 Author Share Posted November 12, 2015 Tried that too and no luck so the ribbon is going back. Thank God I bought a backup for this year! Link to comment Share on other sites More sharing options...
Recommended Posts