debtoews Posted November 8, 2015 Share Posted November 8, 2015 This is my first year using ELL's- I have 15 of them to connect 15 different house. I have them on comm 7 at 56K speed- When I go into the hardware manager- they show up and test ok but when I go to run a sequence to test them..nothing..do I need a drive for them or something??? thanks Link to comment Share on other sites More sharing options...
plasmadrive Posted November 8, 2015 Share Posted November 8, 2015 Are you closing the Hardware manager? They can't both run the lights at the same time. Close the Hardware and open the sequencer.. make sure the "control lights" is checked in the sequence editor 1 Link to comment Share on other sites More sharing options...
WhitePlainsNY Posted November 8, 2015 Share Posted November 8, 2015 It it solely connected to your show PC with a serial or USB adapter first or is there a controller in between? Link to comment Share on other sites More sharing options...
debtoews Posted November 8, 2015 Author Share Posted November 8, 2015 I have a 485 adapter/Cats cable to the neighbors controller from my computer and then the first ELL plugged into his controller Link to comment Share on other sites More sharing options...
debtoews Posted November 9, 2015 Author Share Posted November 9, 2015 Ok got everything working tonight- thanks for your help guys! Link to comment Share on other sites More sharing options...
dgrant Posted November 9, 2015 Share Posted November 9, 2015 What did you find if I may ask? Link to comment Share on other sites More sharing options...
debtoews Posted November 10, 2015 Author Share Posted November 10, 2015 I didnt have the comm ports configured...whata dummy I am! Link to comment Share on other sites More sharing options...
Recommended Posts