jimmy sartain Posted September 22, 2015 Share Posted September 22, 2015 ! have 1 lor unit connected to pc with an Ethernet cable , i click auto configure and it says hwu reconizesdevice on comm6 when i push refresh it says zero devices found ,i am on my 5th Ethernet cable and have use 4 different controllers all getting same answer. it sees a device on comm 6 but when refresh no devices found i have both cm24d and ctb16pc controllers and a usb485 adapter help js Link to comment Share on other sites More sharing options...
LOR Staff Posted September 22, 2015 Share Posted September 22, 2015 1 - Make sure you have set the 'Max Unit' to F0. 2 - Only connect the 16 channel controller and see if you can find it. You probably will. Set the unit ID. Now add the CMB24. Link to comment Share on other sites More sharing options...
Mr. P Posted September 23, 2015 Share Posted September 23, 2015 Also keep in mind that the CMB24D address is set by the dip switches on the card and not the HU. Link to comment Share on other sites More sharing options...
Recommended Posts