PCRail Posted August 28, 2015 Share Posted August 28, 2015 I just started with PE and so far so good. I'm sequencing two side-by-side matrixes with a total of 400 nodes. The fire effect sometimes changes to a solid yellow (like a color wash). The preview looks the same in the editing preview and in the effects generator. Restart in generator doesn't correct this. If I close PE and reopen it, the effect is correct. I can't exactly pin down what causes this. Any ideas? Also please let me know where I can find steps to import a prop from visualizer. Thanks. PE has a bright future. Link to comment Share on other sites More sharing options...
MattBrown Posted September 1, 2015 Share Posted September 1, 2015 I'll try to recreate the issue. What are the dimensions of your matrices? Are you sequencing them individually or as a prop group? Thanks, Matt Link to comment Share on other sites More sharing options...
tbetgeorge Posted October 17, 2015 Share Posted October 17, 2015 I'm having the same issue. Fire won't work at all anymore, just yellow Link to comment Share on other sites More sharing options...
MattBrown Posted October 17, 2015 Share Posted October 17, 2015 I'm having the same issue. Fire won't work at all anymore, just yellow What size is the prop (pixels wide x pixels high)? If you exit the program and restart it does the fire effect work again? Link to comment Share on other sites More sharing options...
MattBrown Posted October 19, 2015 Share Posted October 19, 2015 I have been unable to recreate this problem so far. If it happens to you, please post as much information as you can about what you were doing at the time, the size of the prop it occurred on, does exiting and restarting PE fix the problem, etc. Thanks! Matt Link to comment Share on other sites More sharing options...
tbetgeorge Posted October 22, 2015 Share Posted October 22, 2015 I have been unable to recreate this problem so far. If it happens to you, please post as much information as you can about what you were doing at the time, the size of the prop it occurred on, does exiting and restarting PE fix the problem, etc. Thanks! MattA few days ago it would work when I restarted the software but not anymore. My prop is a tombstone with 90 pixels. Problem is, in the generator, fire doesn't work on anything anymore... Link to comment Share on other sites More sharing options...
MattBrown Posted October 22, 2015 Share Posted October 22, 2015 A few days ago it would work when I restarted the software but not anymore. My prop is a tombstone with 90 pixels. Problem is, in the generator, fire doesn't work on anything anymore... Could you please post a screen capture of the Prop Definition window for your tombstone? Thanks, Matt Link to comment Share on other sites More sharing options...
tbetgeorge Posted October 22, 2015 Share Posted October 22, 2015 Could you please post a screen capture of the Prop Definition window for your tombstone? Thanks, Matt Actually, fire won't work at all on anything. Even a single line Link to comment Share on other sites More sharing options...
tbetgeorge Posted October 23, 2015 Share Posted October 23, 2015 I just started with PE and so far so good. I'm sequencing two side-by-side matrixes with a total of 400 nodes. The fire effect sometimes changes to a solid yellow (like a color wash). The preview looks the same in the editing preview and in the effects generator. Restart in generator doesn't correct this. If I close PE and reopen it, the effect is correct. I can't exactly pin down what causes this. Any ideas? Also please let me know where I can find steps to import a prop from visualizer. Thanks. PE has a bright future.Have you found any solutions? Link to comment Share on other sites More sharing options...
MattBrown Posted October 25, 2015 Share Posted October 25, 2015 The root cause of this issue has been found. A fix will be part of the next release. Matt Link to comment Share on other sites More sharing options...
MattBrown Posted October 26, 2015 Share Posted October 26, 2015 This is fixed in the 4.2.10 release. Matt Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now