EmmienLightFan Posted June 27, 2015 Posted June 27, 2015 Is this the three pin waterproof connector sold by most vendors? It measures 1.1cm diameter. I am trying to connect some "low voltage connectable" lights to my DC controller without cutting the end and voiding the warranty. https://drive.google.com/open?id=0B6dCx7Jc8zNnNkZDMjcxMEI2R3c&authuser=0
dgrant Posted June 27, 2015 Posted June 27, 2015 I get mine from Ray Wu's store. He's got all flavors of 3 and 4 pin.
Mr. P Posted June 27, 2015 Posted June 27, 2015 (edited) Technically that is a four pin, but if you are using a CMB24D as stated in your other post then you would use a four pin (+,r,g,b.) An actual three pin would be used on the smart controllers (pos, neg, data) although some smart strips would use a four pin (pos,neg,data,clock). Edited June 27, 2015 by Mr. P
EmmienLightFan Posted June 27, 2015 Author Posted June 27, 2015 Technically that is a four pin, but if you are using a CMB24D as stated in your other post then you would use a four pin (+,r,g,b.) An actual three pin would be used on the smart controllers (pos, neg, data) although some smart strips would use a four pin (pos,neg,data,clock).I am not controlling RGB. They are 30v LEDs seperated into two sets. The dimmer I am using is a smart pixel controlled one from Hanson Electronics. Dimmerhttp://www.hansonelectronics.com.au/product/2811dc15/ Lightshttp://www.festive-lights.com/connectable-lights/ Connectorhttps://drive.google.com/folderview?id=0B6dCx7Jc8zNnNkZDMjcxMEI2R3c&usp=drive_web
EmmienLightFan Posted June 27, 2015 Author Posted June 27, 2015 Does that connector look like Ray Wu's?
Darryl Lambert Posted June 27, 2015 Posted June 27, 2015 Most of the ones I've seen are all similar looking the difference being the diameter. Here is Ray Wu's Here is DIY LEDexpress Here is HolidayCoro's. No diameter is listed
Recommended Posts