Dale W Posted December 11, 2007 Share Posted December 11, 2007 I purchased a separate MP3 card player to control the shows for last year and it worked perfectly. I was forced to upgrade computers to a Vista Operating system.Now, when I try to use the card, connected to a controller, nothing is happening. I know my SD card is working and the files are on it.Any ideas? Link to comment Share on other sites More sharing options...
dslowik Posted December 11, 2007 Share Posted December 11, 2007 We will need a little more info.LOR version.What do the LED's do on the MP3 card when it is powered up and no SD card is in.What LED's when the SD card is inserted.What happens to the LED on the controller during each of these.Are you sure the SD card is formatted with FAT (not FAT32). Link to comment Share on other sites More sharing options...
Dale W Posted December 12, 2007 Author Share Posted December 12, 2007 I am using LOR 1.15I have the old firmwareI am able to program songs, now, and get them to be able to run on the card.What I am trying to do, is to hook the Card up to a timer that will turn on and off when power is applied.When the SD card is not inserted, I get a red flashing on "E" and a green "P" constantly on.I have an auxillary power source plugged into the socket with the jumper removed and still have a green "P" Link to comment Share on other sites More sharing options...
Dale W Posted December 12, 2007 Author Share Posted December 12, 2007 I have solved my problem. My transformer was not the correct voltage, so the card was being powered by the LOR units.Thanks to all!!! Link to comment Share on other sites More sharing options...
dslowik Posted December 12, 2007 Share Posted December 12, 2007 That makes sense. I was scratching my head trying to figure this one out. Link to comment Share on other sites More sharing options...
Recommended Posts