don731 Posted March 22, 2015 Share Posted March 22, 2015 I currently use a couple of CCRs on my layout (see https://youtu.be/SgAHEfi9szA), and I use a generic LED floodlight that throws the blue light onto the layout. I just set that flood to the blue color, and it remembers it every time the LOR channel turns on the power to it. What I am looking for is a single LED addressable flood, that would work like the CCRs or other LOR pixel devices, but just be a single flood light, that I could use SuperStar/LOR software to control color, on/off, fade up/down, etc. via a SuperStar subsequence like I use for my CCRs. Any advice welcome! Cheers,Don in Chicagoland Link to comment Share on other sites More sharing options...
Mega Arch Posted March 22, 2015 Share Posted March 22, 2015 I just purchased a couple of the LOR 50 watt RGB floods. I think they are what you're looking for.Got mine from Synchronized Christmas:https://store.synchronized.christmas/rgb-50w-flood Link to comment Share on other sites More sharing options...
don731 Posted March 22, 2015 Author Share Posted March 22, 2015 Thanks! I did not realize they have one with built in controller. On my wish list for the summer sale! Link to comment Share on other sites More sharing options...
john fulkerson Posted March 23, 2015 Share Posted March 23, 2015 150$ kinda pricey for 1 flood dont ya think Link to comment Share on other sites More sharing options...
don731 Posted March 23, 2015 Author Share Posted March 23, 2015 Yes! The 10 watt floods are cheap but then you need a $110 controller. Wish there was a middle choice like $75. Link to comment Share on other sites More sharing options...
don731 Posted March 23, 2015 Author Share Posted March 23, 2015 The dumb flood I got from Amazon was under $20. I may just get a couple more of them and run more channels to that area, one color per light. Link to comment Share on other sites More sharing options...
graysonlough Posted March 27, 2015 Share Posted March 27, 2015 ray wu sells some DMX controlled 10W floods,around 25 dollars each, you would just need a dmx rs485 adapter and an advanced license. Link to comment Share on other sites More sharing options...
don731 Posted March 27, 2015 Author Share Posted March 27, 2015 That is a good price. Already have a top level license. Link to comment Share on other sites More sharing options...
don731 Posted March 28, 2015 Author Share Posted March 28, 2015 ray wu sells some DMX controlled 10W floods,around 25 dollars each, you would just need a dmx rs485 adapter and an advanced license.I could not find a 10W DMX flood on Ray's page...What is your favorite DMX RS485 adapter?Thanks! Link to comment Share on other sites More sharing options...
zman Posted March 30, 2015 Share Posted March 30, 2015 You can buy another USB485 from LOR and assign it as the DMX universe. Before you leap into this, understand more on DMX. It is not difficult, just different. There is lots of vids and info on it. I have some material on my site in the How-To page. Warning with Wu DMX floods. Ensure YOU can assign the addresses on these. Otherwise you will find youself buying an addresser to do this on his floods. I think I heard that was $40. Link to comment Share on other sites More sharing options...
john fulkerson Posted April 4, 2015 Share Posted April 4, 2015 (edited) after i got the HANG of dmx it seems a lil simple of course not as simple as plug and play lor but its diy ( do it you self lol) Edited April 4, 2015 by john fulkerson Link to comment Share on other sites More sharing options...
Recommended Posts