JStur23 Posted December 24, 2014 Share Posted December 24, 2014 (edited) This is what I keep getting. Error: (8002) Com Port ErrorWhile: Open COM3 params baud=56000 parity=n data=8 stop=1 xon=off odsr=off dtr=off rts=off idsr=offWhile: Open COM3 params baud=56000 parity=n data=8 stop=1 xon=off odsr=off dtr=off rts=off idsr=off I have 32 channels and 2 CCRs. The drivers are all up to date. Any suggestions? Thanks, Joey Edited December 24, 2014 by JStur23 Link to comment Share on other sites More sharing options...
jimswinder Posted December 24, 2014 Share Posted December 24, 2014 I'm getting the same error: http://forums.lightorama.com/index.php?/topic/34721-dmx-listener-problem/ Did you by chance upgrade to Ver. 3.12.0? That's when I started getting the message. Link to comment Share on other sites More sharing options...
Jefffrompawpaw Posted December 31, 2014 Share Posted December 31, 2014 I had the same problem. I even started a thread about it here. It took multiple restarts on the laptop. Uninstalling and reinstalling USB485 drivers. In the iend it started working without really knowing what was going on. thread link: http://forums.lightorama.com/index.php?/topic/34769-usb485-not-recognized/#entry318301 Link to comment Share on other sites More sharing options...
drivemewilder Posted December 31, 2014 Share Posted December 31, 2014 Are you using more than 1 network/adapter? If so...you will get this message if you unplug one of the USB485's without changing it to "none" in the network preferences. If you assign a network, it needs to be plugged in. Link to comment Share on other sites More sharing options...
jimswinder Posted December 31, 2014 Share Posted December 31, 2014 I'm only using one adapter. Link to comment Share on other sites More sharing options...
drivemewilder Posted January 1, 2015 Share Posted January 1, 2015 I would at least check the network preferences and ensure that only 1 network is assigned. Link to comment Share on other sites More sharing options...
Recommended Posts