htebault Posted December 24, 2014 Share Posted December 24, 2014 LOR 3.11.2 on Win XP. This runs two networks, one highspeed to the 12CCR tree, and a second standard network running 4 controllers.Everything had been running fine normally. I have two shows in the schedule run ever day and leave the system on at all times. I have noticed the show crash about once per week which results in a C++ application crash message on the monitor. Once I clear that error message, the scheduler recycles itself and restarts the shows.It appears to occur when I edit show elements during the day. I first stop the show gracefully - go into editor and make changes, then restart the show scheudule. That night will get a failure which once I clear the error will restart and not have any more problems (until the next time I unload/reload).Any thoughts - Should I restart the XP system between shows ? Link to comment Share on other sites More sharing options...
htebault Posted January 3, 2015 Author Share Posted January 3, 2015 For what it is worth, the crashed the few times this season. I realized quickly that if I restarted the system, then loaded the control panel/show - it would not crash. Only when the show had been running for a few days, and IF I unloaded / edited somthing / reloaded the show would it then crash - So, leave the show and schedule alone once you set it. If you do change - restart windows was my solution. (of course, restarting windows is often a solution. Link to comment Share on other sites More sharing options...
k6ccc Posted January 3, 2015 Share Posted January 3, 2015 Never had a problem, but I have my show computer set to reboot at 3:30 every afternoon. Don't know if that helps or not, but several years ago I read a recommendation to that effect, so I have mine set to reboot. Link to comment Share on other sites More sharing options...
Recommended Posts