Dan C Posted December 19, 2014 Share Posted December 19, 2014 Hey guys, I have an emergency here. Tonight I got home and noticed a large section of my c9 seasonal ent. Pixels were not working. About 5 bulbs in from the beginning, the 5th bulb doesn't act properly, from there all the way to the end, they are out completely. They were not wet. And are individually attached to the gutter, so they haven't been moving. No cut wires or anything. They have been working without fail since thanksgiving until now.Any suggestions? Please help, tomorrow starts my busiest days!!!!! Link to comment Share on other sites More sharing options...
k6ccc Posted December 19, 2014 Share Posted December 19, 2014 Not specifically familiar with the SE pixels, but generally when that happens on most other pixels, I would suspect the one that is not acting properly is bad. Replace it with a spare. Link to comment Share on other sites More sharing options...
Dan C Posted December 22, 2014 Author Share Posted December 22, 2014 Thanks. I did end up having to splice in a bulb. Its not pretty but it should get me through the season. Now I have another problem though. I have one light on my upper gutter, that is really hard to get to. It is acting funny but not all the time. every now and then, its shows full white and then as the sequence changes it comes and goes. I guess the good thing is the rest of the lights downstream are still working. I just hope the signal gets populated.... Link to comment Share on other sites More sharing options...
Recommended Posts