CLD Kevin Posted December 18, 2014 Share Posted December 18, 2014 (edited) For the life of me I can't remember how to run a show without using a LOR adapter? Using Enttec Open and getting Comm Port error messages when trying to run "Show on Demand". Only the dmx adapter is set up in the network adapter as Universe 1. The LOR shows "none". Edited December 18, 2014 by CLD Kevin Link to comment Share on other sites More sharing options...
sax Posted December 18, 2014 Share Posted December 18, 2014 I don't know if this helps but this is the only thing I remember reading about no LOR adapter. http://forums.lightorama.com/index.php?/topic/23207-initial-setup-for-e131-if-you-do-not-have-an-lor-rs485-usb-adapter/I know it is for e 131. But maybe it can be applied??? Link to comment Share on other sites More sharing options...
Dennis Cherry Posted December 18, 2014 Share Posted December 18, 2014 If you do not need or want to use the LOR USB adapter or output, just remove it from your NETWORK Preferences in the LOR Folder. Just keep the Entec Open in the DMX folder. Does not matter if you have any old channels still assigned to the LOR folder, they will be ignored. You can reassign them as a DMX channel if you want. Link to comment Share on other sites More sharing options...
CLD Kevin Posted December 18, 2014 Author Share Posted December 18, 2014 Thanks...that was it. "None" for the LOR network. I wasnt at the location and the customer told me there was nothing in the LOR adapters. I was finally able to remote in and COM1 was there for Reg Network. Removed and Voila! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now