CCR Posted December 10, 2014 Share Posted December 10, 2014 I have downloaded sequences from Superstar Lights. Purchased the audio files. Setup the correct configurations using two networks. Exported into sequence editor and used hardware utility to build my show of six sequences and send to the SD card. Hardware utility program says card is complete. I plug the card into the G3- MP3 director and the display says "error no show on card". I am using a class 4 card with 8gb size.I can check the files on the card with my computer and it shows there are files for each sequence and one config.bat file on the card. What else do I check Link to comment Share on other sites More sharing options...
Don Posted December 11, 2014 Share Posted December 11, 2014 Are you using the SD card that came with the MP3 director? If not, and your using a SanDisk SD Card ... you need to pick another brand. SanDisk and the directors don't play nice together. Link to comment Share on other sites More sharing options...
bschilz Posted December 11, 2014 Share Posted December 11, 2014 I agree with Don and it may be a size problem. I used a 32 GB SD card and it wouldn't work for me either. I switched to an 8GB SD card and it worked! Link to comment Share on other sites More sharing options...
bbrescia Posted December 22, 2014 Share Posted December 22, 2014 8 Gig is the max you can have on an LOR G3-MP3 card. My Lexar cards work great but SanDisk SDHC cards come up with errors. This should not be the case because all these cards are formatted the same - FAT32 or exFAT should work fine but not NTFS disk structure. I urge LOR to fix this in its firmware so that we can count on our shows running correctly. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now