SnappyTom Posted December 8, 2014 Share Posted December 8, 2014 HI y'all, Two questions I can hold the reset button on the CCR controller and cycle through all the colors but during the show 5 of the ribbons don't come on at all. I reset them and nothing.All the lights on the controllers are steady on and Hardware utility finds them all. Second part When I run the show on Com6 the CCR tree works and when I run on Com5 the LOR lights work but they will not run the show on both while on one or the other. Link to comment Share on other sites More sharing options...
KStatefan Posted December 8, 2014 Share Posted December 8, 2014 HI y'all, Two questions I can hold the reset button on the CCR controller and cycle through all the colors but during the show 5 of the ribbons don't come on at all. I reset them and nothing.All the lights on the controllers are steady on and Hardware utility finds them all. Second part When I run the show on Com6 the CCR tree works and when I run on Com5 the LOR lights work but they will not run the show on both while on one or the other. Do you have two networks? Have you set this up in the network preferences? Link to comment Share on other sites More sharing options...
SnappyTom Posted December 8, 2014 Author Share Posted December 8, 2014 Yes I do have two networks and all ran fine last year but i was in the preferences and only see Com6 and nothing in A? Shouldn't in the A column be my Com5?For the second network? Link to comment Share on other sites More sharing options...
KStatefan Posted December 8, 2014 Share Posted December 8, 2014 It should be Com5 or Com6 depending on how you have your sequence. Link to comment Share on other sites More sharing options...
SnappyTom Posted December 8, 2014 Author Share Posted December 8, 2014 Changed it to Com5. running the show now to see if it controls both networks. Link to comment Share on other sites More sharing options...
SnappyTom Posted December 8, 2014 Author Share Posted December 8, 2014 What ever com I have it on that network only works. Link to comment Share on other sites More sharing options...
KStatefan Posted December 8, 2014 Share Posted December 8, 2014 (edited) What ever com I have it on that network only works. You need to have two specified. Edited December 8, 2014 by KStatefan Link to comment Share on other sites More sharing options...
SnappyTom Posted December 8, 2014 Author Share Posted December 8, 2014 I didn't change it from last year and there wasn't both Coms listed. Now I listed both coms and both networks are working. Now the second question, I have only 11 CCRS due to two are in the shop. earlier 1,2,3,7,8,9, were working and 4,5,6,10,11 were not. After playing with the networks, 4,5,6,10,11 are working and 1,2,3,7,8,9 are not? Link to comment Share on other sites More sharing options...
SnappyTom Posted December 8, 2014 Author Share Posted December 8, 2014 Thanks Statefan for the network help. Link to comment Share on other sites More sharing options...
Recommended Posts