Jump to content

MIS FIRE OF CHANNEL


Harbs
 Share

Recommended Posts

I HAVE A PROBLEM THAT I CAN NOT FIGURE OUT.

When my mega tree spins I have another channel light up.

My mega tree uses 16 channels on controler #4

channel 7 on controller 6 turns on when the tree is spinning

I have checked the sequence and it seems to be OK.

Anyone have any ideas????



Harbs

Link to comment
Share on other sites

It really does sound like a channel config issue. Check every channel for proper assignments. If two rows in the sequence editor are vying for the same circuit, all sorts of strange things can happen (just happened to me the other night).

-Tim

Link to comment
Share on other sites

Here's a real easy way to check your configuration (especially since you're using LOR 1....Chuck Hutchings has written an LOR utility that was made to print out configurations, but it also gives you a "look at a glance" of all your channels and configurations for easy troubleshooting.

The utility is here:

http://www.chuckscorner.com/LORUtility.htm

I hope that helps....Randy

Link to comment
Share on other sites

Thanks!! I think it is fixed. Unfortunately we are getting a major rain here in Ohio.

Not running the lights tonight. It appears that it was a channel configuration

problem. I was changing a channel setting but it seemed to not save properly.

I have used Chuck's program before and it does seem to work.





Harbs

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...