MetalMatrix Posted November 28, 2014 Share Posted November 28, 2014 How long can you leave the light fully on that are connected to the LOR controller? I not fully ready to play all the sequences I have so I want to have the light stay on when there are none available? Just want to make sure the circuits do not over heat with all the lights on. Thanks Link to comment Share on other sites More sharing options...
PaulXmas Posted November 28, 2014 Share Posted November 28, 2014 I would think you would be fine if you are under the limits (I think under 8 amps per channel) Link to comment Share on other sites More sharing options...
Brian Mitchell Posted November 28, 2014 Share Posted November 28, 2014 You gotta do the math. You should know what every circuit is drawing. 1 Link to comment Share on other sites More sharing options...
JeffF Posted November 28, 2014 Share Posted November 28, 2014 You gotta do the math. You should know what every circuit is drawing. This! There shouldn't be any question in you mind like this if you set everything up properly. You should know what each and every channel draws. Link to comment Share on other sites More sharing options...
Max-Paul Posted November 29, 2014 Share Posted November 29, 2014 Paul thats right. 8 amps per channel, but only 15, or 20 amps per bank of 8, depending on which controller you have. So it might be more like 1.8 or 2.4 amps per channel if you are going to turn all on at the same time. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now