suprmanchd Posted November 23, 2014 Share Posted November 23, 2014 1st year for me. I purchased a 1602 contoller on ebay. It has the old mp3 director in it. Everything worked great. The guy I bought it from left me a SD card in it with a bunch of sequences on it. It was great!!! I wanted to make it better by adding a few more sequences to it. I bought the lor software, launched, found a thx into, downloaded it. Simple show builder and put on SD card. Took care put in director and light on controller was solid for a few seconds then flashes red. I take card out, put back on computer and evidently it erasedan my show. I have true to put some others on SD card and all I get is red blinking light after a few seconds. I have family coming tommorow night for thanksgiving and all my work is down the drain. PLEASE HELP!!! I am not very tech savvy. Thanks a ton. -chad Link to comment Share on other sites More sharing options...
dgrant Posted November 24, 2014 Share Posted November 24, 2014 I know nothing about the directors so can't help you there but contact the seller on Ebay and ask him/her if they have a backup of the files. Also check your computer's trashcan...they might possibly be there. Link to comment Share on other sites More sharing options...
Caleb Linburg Posted November 24, 2014 Share Posted November 24, 2014 If you send me an email to clinbu@gmail.com I can send you some older sequences of mine that have less channels. You can adapt them to your display. Just email me so I don't forget and ill have your email. http://forums.lightorama.com/index.php?/topic/33456-16ch-christmas-sequences/ This might help you Link to comment Share on other sites More sharing options...
wbaker4 Posted November 24, 2014 Share Posted November 24, 2014 When you write the sequences to the SD card, make sure you eject the card properly so that data is flushed. (right click - Eject) Link to comment Share on other sites More sharing options...
jagipson Posted November 24, 2014 Share Posted November 24, 2014 I had a problem with my director where I had to delete all the files on the SD card and repopulate the card using LOR hardware program. This fixed my issue Link to comment Share on other sites More sharing options...
cowboy casey Posted November 24, 2014 Share Posted November 24, 2014 I believe what happened was when you loaded a show using the simple show builder, it loaded the new songs to show number 1.. This replaced show number 1 that was on the SD card... I cant remember if it warns you that you are overwriting any shows you already have on the card.... Sorry Link to comment Share on other sites More sharing options...
Recommended Posts