TitanBry77 Posted November 11, 2014 Share Posted November 11, 2014 Hey all, I been messing with the LCC file and can't figure out if it's possible to just export a portion of my configuration file. I have my 2014 Halloween config and the pixels/DMX universes are setup as I need them, they will all carry over to my Christmas setup. I have my Christmas 2013 setup, in which I didn't have near as many pixels. Anyway to just export/bring over the pixel stuff from 2014 Halloween Config? If I just import 2014 Halloween it will overwrite everything, I don't want to change all my AC channels. May just have to start the 2013 Christmas from scratch on the DMX/Pixel side? Thanks! Link to comment Share on other sites More sharing options...
ItsMeBobO Posted November 11, 2014 Share Posted November 11, 2014 There are a few tricks you can use. The import config function will attempt to preserve any extra channels it finds which are above the count of the config you are importing. knowing that you can pad configs here and there to get just the extra to be 'added' to the end. Note that you will lose all groupings and their names but you wont lose the circuit numbers. OR you can use vegomatic to define the DMX universes again with the same settings and append those to the end. Link to comment Share on other sites More sharing options...
TitanBry77 Posted November 11, 2014 Author Share Posted November 11, 2014 Hmmm ok vegomatic seems like the ticket. I downloaded it earlier in the season but didn't get too far. May need to see if there is a tutorial or something. Link to comment Share on other sites More sharing options...
ItsMeBobO Posted November 11, 2014 Share Posted November 11, 2014 http://forums.lightorama.com/index.php?/topic/30960-6-tips-for-large-channel-count-sequencing/?p=285321 Link to comment Share on other sites More sharing options...
Recommended Posts