larryk5 Posted November 12, 2014 Share Posted November 12, 2014 I've opened sequences that where done with 2.X, I've only had 3.X on any of my computers. I know you would have trouble going the other way! You may be able to do a clean install and have both versions on one computer. Link to comment Share on other sites More sharing options...
Max-Paul Posted November 12, 2014 Share Posted November 12, 2014 Backwards compatible. Now way I can see of having two versions loaded at same time on same computer. Link to comment Share on other sites More sharing options...
Denny Posted November 12, 2014 Share Posted November 12, 2014 I have opened sequences I did in LOR 1 my first year with the current LOR version with no problems at all. Link to comment Share on other sites More sharing options...
Maine Lights Posted November 12, 2014 Author Share Posted November 12, 2014 Thanks all. Will get the latest version today. Link to comment Share on other sites More sharing options...
Maine Lights Posted November 13, 2014 Author Share Posted November 13, 2014 Uploaded 3.11.2 Standard. I opened up the LOR HW Utility and searched for the unit and nothing was found. Tried a few times and still could not find the controller. Any thoughts now? Link to comment Share on other sites More sharing options...
dgrant Posted November 13, 2014 Share Posted November 13, 2014 Tell it to reload the comm port first in this case, make sure it finds that. Link to comment Share on other sites More sharing options...
chandalen Posted November 13, 2014 Share Posted November 13, 2014 (edited) /jedi mind trick I misread! Edited November 13, 2014 by chandalen Link to comment Share on other sites More sharing options...
Premier Posted November 14, 2014 Share Posted November 14, 2014 I can't see any picture of your set up, make sure you double check what your DIP switches on the board are set to against what you are selecting in hardware set up. It comes from factory set up as controller ID # 01, if you also have other 16 channels controllers set up and have given one of those the ID of 01 prior to installing the CMD Board that might be an issue. I sent mine CMD board at 0A and controllers at 01 so avoid confusion see http://www1.lightorama.com/Documents/CMB24D_Man_Web.pdf for details. Link to comment Share on other sites More sharing options...
Recommended Posts