Bizywk Posted November 6, 2014 Share Posted November 6, 2014 We're building a 12 strand CCR Tree for this Christmas and trying to finish our star topper this week. We have a large sheet of polyethelene and are ready to cut out the shape and start drilling for our smart pixel nodes this week. Does anyone have a drawing of their star that they'd want to share so we can use it for a drilling template? Frank had a super drawing for his tree he shared some time back in post #4.http://forums.lightorama.com/index.php?/topic/23186-anyone-else-building-a-frame-for-a-12-ribbon-ccr-tree/ Link to comment Share on other sites More sharing options...
k6ccc Posted November 6, 2014 Share Posted November 6, 2014 I have an AutoCAD drawing of mine - I can convert to a PDF. My star has 80 pixels in the outer ring, then 70, 60, 50, 40, and finally 30 in the innermost ring. Link to comment Share on other sites More sharing options...
Ron Boyd Posted November 6, 2014 Share Posted November 6, 2014 (edited) https://www.dropbox.com/s/6x2emgi7u5u6wpc/RGB%20Star.pdf?dl=0 This drawing is full size. It's the actual size that Brian uses. I bought the material from him and drilled myself because I was using RGB nodes instead of LEDs. You can print this as a poster on your home printer, but there's the chore of cutting the edges and taping it together. I took this pdf to a print shop, and about $12 later, I had a full size print-out Edited November 6, 2014 by Ron Boyd Link to comment Share on other sites More sharing options...
Dave H1 Posted November 6, 2014 Share Posted November 6, 2014 Does anyone have drawings for a north / Bethlehem star? Link to comment Share on other sites More sharing options...
KStatefan Posted November 6, 2014 Share Posted November 6, 2014 Does anyone have drawings for a north / Bethlehem star? What format do you want one in? Link to comment Share on other sites More sharing options...
Dave H1 Posted November 7, 2014 Share Posted November 7, 2014 What format do you want one in?I should be able to do "pdf" on my old plotter Thanks Link to comment Share on other sites More sharing options...
KStatefan Posted November 7, 2014 Share Posted November 7, 2014 I should be able to do "pdf" on my old plotter Thanks This is what I used https://www.dropbox.com/s/f9plajw39e9yn70/BethlehemStar2.dwg?dl=0 https://www.dropbox.com/s/wq84uvq2zcpwnca/BethlehemStar2.pdf?dl=0 Link to comment Share on other sites More sharing options...
Dave H1 Posted November 8, 2014 Share Posted November 8, 2014 Thank you KState. I also found this file over at AusChristmas which would allow you to adjust the size of the star and keep it in proportiondrawing+a+star.pdf Link to comment Share on other sites More sharing options...
Recommended Posts