steve synek Posted October 28, 2014 Share Posted October 28, 2014 Just throwing out an issue I discovered tonight. I changed the firmware on my CCPs to ver 1.18 because of the garage door opener issues. When I went to test some pixels tonight, the test button would not function. After my panic attack, I took a second unit and the same thing happened. No pixels lit. The pixels would not run the test pattern. The status light on both the controllers changes from a slow blink, to a very fast blink, but no pixels go on. My next step was the hardware utility which found the units and the pixels worked with the extended control console. Anybody else have this issue? Should I be concerned? Steve Link to comment Share on other sites More sharing options...
Recommended Posts