RGB Pixel strings with LOR protocol in XL/NC setup

[Manti]

I am hoping someone can point out my error in the xl/nc setup of my controllers for my pixel tree.  I've tried multiple times, watched most of the setup videos but all of them appear to use either 1.31 or DMX protocols.  I've been wanting to stick with LOR protocol at least for now as I only have 1800 channels.

 

Background:  I've created a 180 degree tree in xl/nc that has 12 strings of 50 pixels (3 ch/pixel) with 2 strands per string.  I then attempted to convert my LOR seq with the 12 controllers (6 actually but the LOR Pixel controllers can be setup to be 2 different IDs for each 50 pixel string).  Each time I get the unmapped channel errors by the hundreds.  I've tried it with and without the macro channels being in the file.

 

In the setup, I selected USB>>LOR protocol, 115K baudrate, end channel 150 for each of the 12 controllers added.  This then shows xlights/Vixen FPP mapping that I have channels 1 - 1800 with each controller having 150 channels.

 

I would appreciate any insight or advice anyone can give.  I've been wanting to use nc effects but I just can't seem to wrap my head around what I'm doing wrong.

 

Thanks,

 

Mike A.