donnyaz Posted October 10, 2014 Share Posted October 10, 2014 So I bought an InputPup for my Halloween display so that when a car pulls up to the display the show will play one sequence and then go back to the static display but it seems when I Show editor and the Interactive tab to create a jukebox show,in the jukebox I put in 3 sequences . What I would like is a static display to run when no one is there but when a car pulls up the static display stops and one sequence start and at the end of that sequence the static display to start back up.... anyone know how to do this ? Link to comment Share on other sites More sharing options...
Trickyd Posted October 11, 2014 Share Posted October 11, 2014 create the static show as an interruptible show, allow to be interrupted by an other show ( either : start when powered up version or timed version ) make the second show the triggered on an input of the pup with an input number of your choice. not much more to it I use three big buttons as interrupts of my static timed show, these triggered shows are not allowed to be interrupted, otherwise it could make a mess when people keep pushing the buttons. DickThe Netherlands Link to comment Share on other sites More sharing options...
Recommended Posts