Greg Posted November 24, 2007 Author Share Posted November 24, 2007 The LED continues to steadily blink, no steady LED at all. the unit is hooked up directly to the computer. I tried multiple cables including the ones that are still working with the rest of the network. I also tried a phone cable from the first unit to the problem unit. The board worked fine last night. When I set everything up yesterday during the day I ran the hardware utility just to see if I can see the controllers. It found all units, the problem unit which is a CTB-16D came back as a PC board, but the show still ran fine. I also tried to control lights with the HWU but that didn't work. I can't assign a unit number to the controller because the HWU doesn't see it. To me it is a major COMM problem. I did have that unit hooked up a few weeks before setting everything up and had no problems.greg Link to comment Share on other sites More sharing options...
Tim Fischer Posted November 24, 2007 Share Posted November 24, 2007 Yeah, that does sound like an LOR support issue. Good luck...-Tim Link to comment Share on other sites More sharing options...
joneslights Posted November 24, 2007 Share Posted November 24, 2007 Is it the only one connected? If you know the unit number, try reloading the firmware with the newest known.If you were near me, I'd let you borrow one Greg Link to comment Share on other sites More sharing options...
Tim Fischer Posted November 24, 2007 Share Posted November 24, 2007 joneslights wrote: Is it the only one connected? If you know the unit number, try reloading the firmware with the newest known.If you were near me, I'd let you borrow one GregIf he has a blinking light, he doesn't have comm, and without comm, no way to download firmware...-Tim Link to comment Share on other sites More sharing options...
joneslights Posted November 24, 2007 Share Posted November 24, 2007 True. Ignore my last post Link to comment Share on other sites More sharing options...
cmoore60 Posted November 24, 2007 Share Posted November 24, 2007 I built all my boards from kits. I had a similar issue and the problem turned out to be the comm chip. I THINK the chip number is U1.Anyway, it will mean contacting support@lightorama.comChuck Link to comment Share on other sites More sharing options...
Recommended Posts