godman Posted June 15, 2014 Share Posted June 15, 2014 Hello everyone,My Kids bought these for me for fathers day but I have no idea what I need topower these up or use them? Can someone please give me some direction on how to use these?Thanks for your help!http://www.ebay.com/itm/160862556700?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649http://www.ebay.com/itm/130996151573?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 Link to comment Share on other sites More sharing options...
dgtlpro Posted June 15, 2014 Share Posted June 15, 2014 The RGB strip is easy enough...if it is one strip then a 3 Chanel 12 volt controller will work...as the strip looks to be dumb RGB strip. You can use the LOR 24 Chanel controller if you do not have the advanced license, if you have the advanced license then a dmx controller like the ones holidaycoro sells would work. The floods on the other hand are a different story...they powered by 120v but are controlled by the IR remote. To control them with LOR they will need to be modified. Link to comment Share on other sites More sharing options...
godman Posted June 15, 2014 Author Share Posted June 15, 2014 (edited) how do I modify the RGB floods to work? As far as the strips, I do have the advanced license and I do have a LOR 24 Channel controller. Can you please let me know what wires go where etc? The strips also have an IR controller Edited June 15, 2014 by godman Link to comment Share on other sites More sharing options...
james campbell Posted June 15, 2014 Share Posted June 15, 2014 Ok for the strips. On the controller you will hook up on channel one a positive and negative. Then channel 2 and 3 just a negative. Then start out with strip two positive and negative on channel 4 negative only on 5 and 6. A 12 volt 360 watt power supply will he plenty to power the 8 strips the board will controll Link to comment Share on other sites More sharing options...
Recommended Posts