godman Posted June 13, 2014 Posted June 13, 2014 Hello everyone! I'm Stuck, I just received my LOR RGB Floods with the CMB24 controller card I was able to hook up all the power, change the ID to OA etc. Just for testing purposes I only hooked up one flood, I tested the flood through the utility hardware program and everything worked as it should. I then went in created a new sequence just to test the one flood and I added RGB channels, In the channel settings I have the following information Color: Red Device Type: LOR Controller Network: Regular Unit OA (verified this through the hardware utility) Circuit 1 Color: Green Device Type: LOR Controller Network: Regular Unit OA (verified this through the hardware utility) Circuit 2 Color: Blue Device Type: LOR Controller Network: Regular Unit OA (verified this through the hardware utility) Circuit 3 The wires are hooked up on Circuits 1-2-3 on the card, I put in a couple effectson all 3 channels but the fold wont light up when playing the sequence? Any thoughts?
Ron Boyd Posted June 13, 2014 Posted June 13, 2014 Make sure your Network properties match the Unit used. Make sure under "Play" that "Control Lights" is checked and stays checkedThose are the first two things to check.
Dennis Laff Posted June 13, 2014 Posted June 13, 2014 I don't think you added the rgb channels right Start again and add device instead of channels add cmb24 and that will give you 8 rgb channels
godman Posted June 13, 2014 Author Posted June 13, 2014 (edited) Can you recommend a tutorial that will teach me how to change the colors? Edited June 13, 2014 by godman
steve synek Posted June 14, 2014 Posted June 14, 2014 look at the top of this page - " Video tutorials".........lots of great help there. Steve
Dennis Laff Posted June 14, 2014 Posted June 14, 2014 Godman now that you have the black rgb channels you simply go the color fade tool and pick a color and drag to the channel grid
Recommended Posts