jlarson Posted March 22, 2014 Share Posted March 22, 2014 Hello All, I am dipping into the robotics this year and can use some help. I have a servodog from LOR. 2 6 volt servos and a 12 volt linear actuator. I can get the servodog and the servos to work but not sure how to tie the linear actuator into the mix. Any help or diagrams would be great. Thank You Link to comment Share on other sites More sharing options...
Steve Constantino Posted March 23, 2014 Share Posted March 23, 2014 I have used these with the servodog and other RC applications. They work great, but they are a bit pricy. http://www.servocity.com/html/linear_servos.html Link to comment Share on other sites More sharing options...
bobschm Posted March 24, 2014 Share Posted March 24, 2014 I think you will need to use PWM outputs for those 12 volt actuators. They can handle 2amps at 50 volts. Check the Servodog manual. Link to comment Share on other sites More sharing options...
Recommended Posts