Jump to content
Light-O-Rama Forums

Network speed checklist


oilmoney

Recommended Posts

   I ran both my networks this year at the recommended 115 or whatever it is ( at work, can't check right now ). Next year I want to bump it up to the 500 level as I had some freeze ups on my CCR tree when some of the sequences got intense. I had my 12 CCR's split between networks as recommended. I want to add either 12 strings of CCB's or possibly 16 or so dumb strings as well next year as well as a bunch of other stuff so I think that basically warrants another network as well.

 

  My question is what do I all need to bump it up to 500? I've already got 3 of the high speed rs485 adapters ( the red ones ), my computer should be adequate with 16 mb ram and I know I have to go into the network utility thingy and change the settings from 115 to 500. Am I missing anything or does anyone have any suggestions or tips to make sure this change goes without a snag?

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...