clips (pvc/lights)

[Jon Compton]

Does any anyone have any ideas on attaching lights to pvc pipe. i normally use tape but its not really cost friendly. i would like something i could reuse. cant post pic they all exceed file size. but think of a pipe with wire on it. 

[jonsimp911]

I use zip ties...  You can buy re-usable ones, or take off standard ones like this: http://lifehacker.com/5903220/unhook-and-reuse-plastic-zip-ties-with-a-simple-trick

[dknahoolewa]

you could velcrow the lights to pvc.

I zip tie my lights to PVC and mount under side of the eves. makes for fast setup and take down. I do 10' at a time.

[Little_b]

Not sure what kind of lights you are using, but I attached my strip lights to F-channel using zip ties.  Then the channel just slips into the eaves. This eliminates another kind of bracket to hold the PVC on with.

[Djmc2002]

Not sure what kind of lights you are using, but I attached my strip lights to F-channel using zip ties.  Then the channel just slips into the eaves. This eliminates another kind of bracket to hold the PVC on with.

F channel?

[Little_b]

That's what its called. Here is a pic of some of it.

[Dave Batzdorf]

You might try the garden velro.  Much cheaper than the standard stuff.  I used a ton of it this year, pretty good results.  Its cheap enough to either trash or labe and reuse....

 

http://www.homedepot.com/p/Unbranded-45-ft-Plant-Tie-91384/202261952#