ajfelice Posted December 12, 2013 Share Posted December 12, 2013 I have a 12 CCR tree on an Aux A network at 500K. The CCR tree works flawlessly during the show. When the show is off, one of the CCR;s stays on with an all blue color. I have reset the box. No help. Any suggestions? Link to comment Share on other sites More sharing options...
ajfelice Posted December 19, 2013 Author Share Posted December 19, 2013 For anyone who might have the same problem. As it turns out, there was moisture at the bottom of the CCR strand which caused my particular problem. I pulled the strip out of the protective sheath and used a paper towel to absorb the moisture. Problem solved.... 1 Link to comment Share on other sites More sharing options...
Val Bennett Posted December 22, 2013 Share Posted December 22, 2013 I have only one pixel on one CCR doing the same thing. Sounds like I should also check for moisture. Thanks for the tip! Link to comment Share on other sites More sharing options...
Recommended Posts