Jump to content

controller or software problem?


hondaguy929
 Share

Recommended Posts

Hi - strange problem:  controller #1 in daisy chain (but numbered 7 I think) worked fine the last few days but now will not work when sequences play. Works in utility program in the lor software package.  Sequences are unchanged for years, this is the second year for this controller in my line up. Power and data link seem fine. Just stopped working when sequences or show schedule is running. Any ideas?

 

Other 7 controllers work fine.

 

Thanks,

Phil

Link to comment
Share on other sites

I had this happen on my single CCR controller...the HWU would see the controller but no commands ever made it light up. It was a bad RJ45 port connection or the Cat5 cable connection on the RJ45 connector. Make sure the finger wires are not displaced. If so, be very, very careful and pull them back into place. Check for contamination too and clean with a q-tip and alcohol.

Link to comment
Share on other sites

Experiencing a similar problem.  Controller #1 in my Daisy chain of 8 is not working lights during show...  Ran Verifier and I get error messages 7, 28 and 31.  7 seems to be the killer, triggering the other errors.   It says I should unload and reload LOR - ugh.  Hoping there's a better fix.

Link to comment
Share on other sites

Error 7 for "AudioConv.ocx" is just a bug in the Verifier that will be fixed in the next release.  You can ignore it. 

 

Also, it doesn't trigger the other errors - those are entirely different things.  Warning 28 just means you have a channel in your sequence that you didn't assign any effect events to - i.e. you just have the channel as being off for the entire sequence.  Warning 31 means you've got a channel that you've set up to use a network that you don't actually have - e.g. you've got the channel set up to use the "Aux N" network, but you don't actually have an "Aux N" network.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...