sasmuse Posted December 3, 2013 Share Posted December 3, 2013 Hello,I'm going to be adding the hi-speed 485 to my networks this afternoon. Is there anything special I need to/watch out for? I've read through the documentation. Do I need to download the drivers or do they come with the adapter? Any info you'd like to share would be greatly appreciated. Thanks! sally Link to comment Share on other sites More sharing options...
LOR Staff Posted December 3, 2013 Share Posted December 3, 2013 If you go with the higher speed, make sure all your controllers can work with it: You need to be using G3 controllers and/or Cosmic Color devices. The firmware on your controllers/ccrs may need to be updated. Link to comment Share on other sites More sharing options...
sasmuse Posted December 3, 2013 Author Share Posted December 3, 2013 All my ribbons are up to date as well as the firmware on all the controllers. I'm more concerned about the device drivers for the adapter. Link to comment Share on other sites More sharing options...
LOR Staff Posted December 4, 2013 Share Posted December 4, 2013 The drivers will be identical. Link to comment Share on other sites More sharing options...
Recommended Posts